Skip to main content

Banner Sponsors

Intercal Trading Group - Your mohair supplier
Lanctot’s Loveables Teddy - Handmade collectible teddy bears by Rhonda-Lynne Lanctôt. Bears ranging in size from 0.75 inches to 21 inches.

Daphne Back Road Bears
Laconia, NH USA
Posts: 6,568
Website

OK, all this talk about feet brings a question to mind:

When you machine sew foot pads to the leg do you sew with the foot pad on top or on the bottom? Why do you do it the way you do?

SueAnn Past Time Bears
Double Oak, Texas
Posts: 19,986

SueAnn Help Advisor, Banner Sponsor

I first sew around the foot with the pad on top, then turn it over and sew around again with the pad on the bottom.  Gives the seams a little extra strength.  Soooooo . . . yes and yes.

SunnieOne Sunnie Bears
Ridgecrest, CA
Posts: 1,167

I do the same as Sue!

TeddyTyke Posts: 65

I oversew them by hand first. Then machine sew them with the pad on top. I'll also make marks (little dots) right round a quarter of an inch in to remind me of the seam allowance. When I get to a seam, I stop, left the machine foot, check nothing's trapped, then carry on. I also tend to do this bit really slowly, sometimes even turn the machine by hand rather than use electricity so I can control it.

If I'm using leather, I handsew with a glover's needle.

psichick78 Flying Fur Studios
Calgary, Alberta, Canada
Posts: 3,073

ha! I do all that by hand or I have very non-round foot pads.  :crackup:  :crackup:

You ladies must be a pro with the machine!

Jane Perala Jane Perala Designs Ltd.
Vancouver Island, B.C., Canada
Posts: 819

I clip the edge of the foot in about 5 places, then pin on the pad, then with the pad down I sew around on the machine - twice.  I sew all my seams twice - once going one way, then turn around and go the other way.

Daphne Back Road Bears
Laconia, NH USA
Posts: 6,568
Website

I do it with the pad on top and feel like I really fight with it and have to go over places 3-4 times to get a rounded seam. Think I'll try it the other way or do as Sue Ann does.....

Jare Hares & Bears Jare Hares & Bears
Polo, IL
Posts: 983

I always sew with the pad on top that way I can keep a nice shape.  If I remember I sew again with the pad on the bottom that does tend to give the foot a better, more rounded shape.

matilda Matilda Huggington-beare
WA
Posts: 5,551

ha! I do all that by hand or I have very non-round foot pads.  :crackup:  :crackup:

You ladies must be a pro with the machine!

I was thinking the very same thing Heather bear_grin

lovenshire Love and Cuddle Nursery
Missouri
Posts: 945
Website

After overcasting by hand I sew on the machine with the pad down on the machine.  I need to see what I am doing with the leg which is harder for me to get set properly...

Board footer

Powered by FluxBB

Banner Sponsors


Curious Mondo - How to make artistic teddy bears with Tami Eveslage
Tedsby - Handmade teddy bears and other cute stuffed animals. Hundreds of teddy artists from all over the world and thousands of OOAK creations.